Pump up your marine audio set-up with this BOSS Audio MR1200PA 1200-Watt 4-Channel Marine Amplifier. This amplifier offers a customized experience with built-in PA system for additional convenience.
Delivering 1200 watts of max power, with 2 to 8-ohm range, this 2-channel unit provides the powerful sound you’ll love. Complete with a bridgeable design, this boat accessory gives you additional power flexibility. With the variable bass boost, gain controls, low-pass filter, and subwoofer level control, you can customize your listening to your liking for a perfect jam-out session on or off the water. The high and low-level inputs offer optimal versatility, allowing you to build an audio system using virtually any standard factory or aftermarket unit.
This amplifier is designed with a built-in PA system, so wake tower speakers or other stereo speakers can be used to make announcements. This device offers thermal protection to prevent overheating and short circuit protection, automatically cutting the output and remain in that state until the short is resolved.
You’ll want to cruise around all the time with this BOSS Audio MR1200PA 1200-Watt 4-Channel Marine Amplifier delivering clear sound, powerful output, and customizable boosts.
- Two-channel amplifier is the perfect addition to your boat for an ultimate listening experience on or off the water with a bridgable design for added versatility
- Weatherproof model provides a total power of 1200 watts with 225 watts x 4 RMS at 2 ohms, 113 watts x 4 RMS at 4 ohms, and up to 450 watts x 2 RMS bridged at 4 ohms
- Includes remote subwoofer control, giving you the ability to boost the sub level when amp and subwoofer are connected to the pre-amp output
- Built-in PA system for making announcements over tower/stereo speakers
- Class A/B stereo amplifier is full-range with MOSFET power supply
- High and low-level outputs allow you to build an audio system using virtually any standard factory or aftermarket source unit
- Fixed high-pass gives you the ability to filter the frequencies that pass through the full-range speakers and variable low-pass filter gives you control over the frequencies that pass through to the subwoofer
- High and low-level inputs allow for versatile use with factory or aftermarket radios
- Variable Bass-boost allows you to adjust the low bass within the boost range for customized sound
- Variable gain control lets you balance the amp’s output with the speakers or subs the amp is driving
- Switchable input sensitivity gives you the freedom to connect the amp to any standard source unit
- Thermal protection prevents overheating and short circuit protection automatically cuts the output and remains in that state until the short is resolved
- Features a unique rubber door which tightly seals all control panel openings when not in use
- Channel configuration: 4/3/2 channel
- Frequency response: 6Hz to 50kHz
- Speaker impedance: 2 to 8 ohms
- RCA inputs: 4-channel
- Low-pass filter: 40 Hz to 150 Hz
- High-pass filter: Fixed 200 Hz
- Variable bass boost: 0 to 18 dB
- Color: White
- Dimensions (L x W x H): 12.72 x 7.32 x 2.07 inches
Questions? We’ve Got Answers.
Helpful answers about product features, setup, and more
What is the amplifier constructed from?
The amplifier is constructed from rubber. The construction is built to handle exposure to outdoor conditions including sun and moisture. This material choice supports everyday use while maintaining the structural integrity needed for the product’s intended applications.
How big is the amplifier?
The amplifier measures 12.72 x 7.32 x 2.07 inches (length x width x height). Use these measurements to plan mounting, placement, or transport for your setup.
What is the amplifier used for?
The amplifier is used for live sound, DJ setups, home audio, or event production, depending on configuration. It connects with a typical audio chain — source, mixer or controller, and amplification — to produce sound for the intended environment.
How do I clean and care for the amplifier?
Wipe down with a soft cloth and mild cleaning solution suited to rubber. Avoid abrasive cleaners that may damage the surface. Regular light cleaning extends the lifespan of the amplifier and keeps it looking and performing well over time.
Who makes the amplifier?
The amplifier is made by BOSS Audio. BOSS Audio produces this item as part of its lineup, and product details such as specifications, included accessories, and warranty terms are set by the brand.
What should I know about the amplifier before buying?
The amplifier from BOSS Audio brings together a few practical features worth highlighting:
- rubber construction
Review the product description and specifications to confirm it matches your specific needs before placing your order.
Reviews
There are no reviews yet.