0
Your Cart
0
Your Cart

A Direct-Vent system uses two vent pipes. One draws air in from outdoors to support combustion. The other exhausts the by-products of combustion to the outside. The two vent pipes may be concentric (exhaust pipe within a larger diameter intake pipe) or co-linear (separate pipes of about the same size).

Combustion takes place inside a sealed chamber – with a glass front in the case of a fireplace. Room air circulates around the combustion chamber, often assisted by a blower, to heat the room.

A DV system is often installed along an outside wall to simplify the vent run, but can also be installed elsewhere in the home and vented through the roof.

Rushmore Direct-Vent Inserts

A Direct-Vent Fireplace Insert turns your existing wood-burning fireplace into an efficient gas-fired heat source.  Direct-Vent Fireplace Inserts are classified as zone heating appliances. Zone heating is inherently more efficient than your existing wood-burning fireplace or your central furnace.

Rushmore Clean-Face Direct Vent Insert (DVCT30CBN)

Rushmore fireplace inserts feature the TruFlame system – a combination of technology and aesthetics to create realistic flames and a glowing ember bed, mimicking a natural wood fire. Available in two sizes, 30 and 35, these inserts turn your wood-burning fireplace into an attractive and efficient focal point. The multifunction remote operates as a conventional thermostat, a Smart Thermostat – which modulates flame height as the room reaches the desired temperature, or as a manual control. The remote also operates the included accent light and blower.

What’s Included

  • Rushmore Clean Face Fireplace Insert
  • Blower
  • Accent Light
  • Ceramic Glass
  • Barrier Screen (Fine Mesh)
  • Multi-Function remote control

Not Included (Sold Separately)

  • Logs (Required)
  • Liner (Required)
  • Surround (Required)
  • Forged Iron Fronts and Insets
  • Beveled Frames
  • Surrounds and Shroud
  • Gas Conversion Kit

Features

  • Multi-Function remote to control (Variable flame height, Overhead dimmer lighting and Variable-speed blower)
  • The TruFlame system combines technology with aesthetics to create
    truly realistic flames and a glowing ember bed, reminiscent of a wood fire
  • Available in two sizes, 30 and 35, these inserts turn your wood-burning fireplace into an attractive and efficient focal point
  • The multifunction remote operates as a conventional thermostat, a Smart Thermostat – which modulates flame height as the room reaches the desired temperature, or as a manual control
  • The remote also operates the included accent light and blower

Specifications

Model DVCT30CBN95
Max BTU (w/both burners) 30,000
Min BTU (w/both burners) 19,500
Min BTU (front burner only) 8,500
Vent Type Direct Vent
Type of Gas Natural Gas
Venting 3 x 4 Flex
Installation Insert
KWH (Maximum) 8.79
KWH (Minimum) 2.49
Orifice – Front #52
Orifice – Rear #47
Air Shutter Opening Front Fully Closed
Air Shutter Opening Rear Fully Closed
Gas Inlet Shutoff Valve (Pipe) 3/8″ MIF
Gas Supply Pressure (Inches Water Column)
Maximum 14
Minimum 4.5
Manifold 3.5

Dimensions

Ceramic Glass Width 25″
Ceramic Glass Height 15″
Width 31″
Height 19″
Depth 18″

Reviews

There are no reviews yet.

Be the first to review “Empire Rushmore Clean Face 30″ TruFlame Multi Function Thermostat Remote Control, Natural Gas Direct Vent Fireplace Insert”

Your email address will not be published. Required fields are marked *